Customizing Your Skoda Yeti Model with the Yeti Monster

Skoda Yeti Vinyl Sticker Decal

Customizing Your Skoda Yeti Model with the Yeti Monster

Your vehicle is an extension of who you are and what you like. There are literally thousands of different things that you can do to your Skoda Yeti to make it more like you.  Many people choose custom paint jobs to complement their black protective moldings while others choose to modify the sound system or to put custom tires and wheels on.  While all of these options are great, they typically cost quite a bit of money.  There are, however, several ways that you can make your vehicle your own without spending a ton of cash.  One of these ways is to install the Skoda Yeti Monster Vinyl Decal on the exterior of your 4x4 Yeti.  A Skoda Yeti monster vinyl sticker decal could be the perfect way for you to set your vehicle apart from others while adding a little bit of flair and personality. 

The Skoda Yeti monster vinyl sticker decal is available in a number of different colors and styles, so it will be important for you to think about which will look the best with the paint of your car.  This decal is professionally designed and is created from top notch vinyl (either matte or gloss).  The Yeti Monster or Happy YetiMonster will fit the badge for any model and can be placed on the windshield, bumper, window or even on a laptop, motorbike or skateboard.

One of the great things about choosing this Skoda Yeti Vinyl Sticker Decal for your vehicle is that it will stay in place while you want it on the vehicle with the help of high quality adhesive vinyl, but can be easily removed.  When you remove the vinyl sticker it does not damage the paint or finish of your vehicle and it comes off in a matter of seconds.  These stickers are extremely easy to install and will only take a few minutes, but will look very professional.  Take the time to get a custom vinyl Yeti Monster sticker that matches your personality and style.

Vinyl Sticker Decals Application Instructions

	1. Measure where you want you decal to be. Then tape in place on 1 side only to use as a hinge, using regular masking tape. Place your tape on the top, bottom or either side, however you feel more comfortable.
	2. Peel slowly the bottom BACKING PAPER away from the STICKER and APPLICATION TAPE together starting at the opposite side of the masking taped hinge, and slowly remove it.
	3. Wet method is suggested for beginners and larger decals. To use the wet method placement, spray the smooth surface with a mixture of soap and water. You can choose to apply vinyl in one of two ways; dry or wet.  Applying vinyl dry does not allow for any mistakes, and recommended for small decals.  Once the vinyl touches the surface, there is no removal without damage.  We suggest that all customers use the wet process for larger graphics. Do not use the wet method on Wall words or reflective vinyl. Wet Application Fluid: Wet method is how you install larger images with NO BUBBLES in it (and a MUST for frosted vinyl to ASSURE every bubble is removed), being wet allows you to squeegee out the air bubbles trapped inside before it sticks to the surface. You can make your own application fluid with 4 drops of dishwashing liquid (dawn, joy, or baby shampoo etc.) to 1 quart of water in a spray bottle.
	4. While still holding the STICKER and APPLICATION TAPE away from the smooth surface. Use a squeegee, credit card or any plastic straight edge to help in application. Start from the side with the tape and gently work away from the tape and squeegee out all water and soap. (Note: if you do not have a squeegee use your fingertips or the sharp edge of a credit card, plastic ruler or similar object)
	5. Use your squeegee and apply pressure from the middle to the outward sides, this will remove all water and start the decal adhesion. Let sit for 5 minutes before removing. If your decal appears to not be sticking the fluid is still behind the decal, just squeegee again and let sit for 10-15 minutes. The decals have a pressure sensitive adhesive the harder you rub the harder it sticks, also the longer you let it sit the stronger the adhesive will adhere.
	6. Now you’re ready to pull off your APPLICATION TAPE layer and view your decal. Gently pull it off, if you see some vinyl start to come up with the APPLICATION TAPE then lay it back down, squeegee, and wait another 10-15 minutes and try again. Prick any air bubbles with a pin and rub down. Be sure that outer edges of decal are rubbed down smoothly and all liquid is forced out. This is essential for proper adhesion.

Quick Vinyl Application Tips....

• Do not apply in cold weather - adhesive may stick but will lift easily.
• Do not apply in extreme heat, apply in the shade - vinyl will get very soft and stretch.
• Do not use alcohol to apply - it will destroy the adhesive.
• Do not use ice scraper on the sticker/decal - may lift or break pieces off.
• Do not touch the adhesive backing - oils from your skin will prevent sticking.
• Do not point high pressure car wash nozzle at the edges of the sticker/decal for a long time - may lift or break pieces.
• Car washes are safe.
• Before application makes sure there is no wax on the surface - adhesive may stick but will lift easily.
• Don't apply wax over graphics, especially if the wax contains any petroleum distillates. 

Cleaning Procedures:  
All surfaces are contaminated to some degree.  To ensure good adhesion to any vehicle surface it is critical that you follow these recommended procedures in decontaminating and preparing the surface prior to any vinyl product installation.  

1. Wash and rinse the area with liquid dish detergent and warm water.  Then dry the surface with a clean, lint-free towel or cloth.

2. Finish up the cleaning process by wiping down the entire area with Isopropyl Alcohol (rubbing alcohol).  To avoid re-contamination during the final cleaning step, wipe the surface in just one direction, using a clean, lint-free towel or cloth.  You are now ready to apply the vinyl.

Temperature Recommendations:
Surface temperatures MUST be between 50 and 90 degrees Fahrenheit before attempting the installation. As a general rule, if the surface is hot to the touch it's over 90 degrees Fahrenheit. Adhesive becomes brittle when it gets too cold and gummy when it gets too hot. Applications outside the recommended range of 50 to 90 degrees Fahrenheit reduce the adhesives' ability to perform.

Application Procedures:  
You can choose to apply vinyl in one of two ways; dry or wet.  Applying vinyl dry does not allow for any mistakes, and recommended for small decals.  Once the vinyl touches the surface, there is no removal without damage.  We suggest that all customers use the wet process for larger graphics.
Do not use the wet method on Wall words or reflective vinyl.


Wet Application Fluid:
You can make you own application fluid with 4 drops of dish-washing liquid (dawn, joy, or baby shampoo etc.) to 1 quart of water in a spray bottle.